Download Print this page

Alaxala AX1250S Series Manual page 23

Software manual corrections for ver. 2.2.c/2.2.d/2.2.e
Hide thumbs Also See for AX1250S Series:

Advertisement

<group-name>
group
RADIUS authentication is used.
RADIUS server groups are used. Specify the group name set by the
command.
However, you cannot use the following character strings:
radius
tacacs+
Notes:
1. If
group radius
failure with the RADIUS server or authentication failure in the RADIUS server disables login to the
Switch. Therefore, we recommend that you specify local password authentication at the same time.
2.
You cannot simultaneously specify both
authentication) and
methods are treated as RADIUS authentication service. Use either of them in combination with local
password authentication.
7. Power Saving
(1) power-control port cool-standby [Change]
The impact on communication and the notes have been corrected as follows. [Ver. 2.2.E and later]
Before the change:
Impact on communication:
None
Notes:
1. If this command is set, link-up of the Fast Ethernet port takes about 3 seconds.
2. During scheduled operation of the power saving functionality, the Switch operates according to the
configuration of the
After the change:
Impact on communication:
Yes
Notes:
1. If this command is set, link-up of the Fast Ethernet port takes about 3 seconds.
2. During scheduled operation of the power saving functionality, the Switch operates according to the
configuration of the
3. If this command is set, the link status of all the Fast Ethernet ports changes, which affects the
communication.
4. The power saving functionality is disabled for Fast Ethernet ports with the speed fixed setting set or
automatic MDIX functionality disabled. To enable the port power saving functionality, disable
auto-negotiation and enable the automatic MDIX functionality (
or a character string beginning with
or a character string beginning with
or
<group-name>
group
<group-name>
group
schedule-power-control port cool-standby
schedule-power-control port cool-standby
radius
tacacs+
is specified for the authentication method, communication
group radius
(RADIUS server group authentication), because both
mdix auto
23
AX1240S-AP-0202C_R2X
aaa group server radius
(general-purpose RADIUS server
command.
command.
specified) during operation.

Advertisement

loading

This manual is also suitable for:

Ax1240s series