Download Print this page

Alaxala AX1250S Series Manual page 13

Software manual corrections for ver. 2.2.c/2.2.d/2.2.e
Hide thumbs Also See for AX1250S Series:

Advertisement

#2: For values greater than 1000 K, set them in 100 K increments (1000 K, 1100 K, 1200 K...10000000 K).
#3: For values that are less than 1000 K, set them in 64 K increments (64 K, 128 K, 192K...960 K).
The range of frames for port bandwidth control is from the MAC header to the FCS. For more details, see
Figure 4-3 Range subject to port bandwidth control.
6. Description of IEEE 802.1X
6.1 Overview of IEEE 802.1X
6.1.2 Overview of the extended functionality [Change]
Table 6-4 Operational conditions of IEEE 802.1X has been corrected as follows:
Before the change:
Table 6-4 Operational conditions of IEEE 802.1X
Category
VLAN type
Port VLAN
Protocol VLAN
MAC VLAN
Default VLAN
Port type
Access port
Trunk port
Protocol port
MAC port
Interface type
fastethernet
gigabitethernet
port channel
Legend
Y: Available
--: Not available
#
Supported at auto-authentication mode for an untagged frame of a MAC port (see 5.4.4 Auto authentication
mode accommodation at the same MAC port).
Port-based
authentication
(static)
Y
--
--
Y
Y
--
--
Untagged
--
Tagged
--
Y
Y
Y
13
AX1240S-AP-0202C_R2X
Port-based
VLAN-based
authentication
authentication
(dynamic)
(dynamic)
#
Y
--
Y
--
--
--
--
Y
--
Y
Y
--
--
--
Y
--
--
--
--
Y
--
Y
Y
Y

Advertisement

loading

This manual is also suitable for:

Ax1240s series