Changes In Mib Reference (For Version 2.2) (Ax1240S-S006-30X) - Alaxala AX1250S Series Manual

6. Changes in MIB Reference (For Version 2.2)
(AX1240S-S006-30X)
2. Standard MIBs
2.2 interfaces group (MIB-II)
2.2.1 interfaces group [Change]
The implementation specifications of the
ifNumber
and later]
The
ifOutUcastPkts
Before the change:
Table 2-2 interfaces group implementation specifications
# Object ID
1 ifNumber
{interfaces 1}
20 ifOutUcastPkts
{ifEntry 17}
After the change:
Table 2-2 interfaces group implementation specifications
# Object ID
1 ifNumber
{interfaces 1}
20 ifOutUcastPkts
{ifEntry 17}
implementation specifications of the
Access
[Standard] The number of network interfaces provided by this system.
R/O
[Implementation] Same as the standard. Changing the interface
configuration causes the value of this object to change.
However, link aggregations are always counted in multiples of 8.
[Standard] The number of unicast packets sent by the upper layer.
R/O
[Implementation] Depends on the interface as follows:
 When the ifIndex indicates a port: Fixed value of 0
 When the ifIndex indicates a VLAN: Fixed value of 0
 When the ifIndex indicates a link aggregation: Fixed value of 0
Access
[Standard] The number of network interfaces provided by this system.
R/O
[Implementation] Same as the standard. Changing the interface
configuration causes the value of this object to change.
[Ver. 2.2.E and later]
[Standard] The number of unicast packets sent by the upper-level layer.
R/O
[Implementation] Depends on the interface as follows:
 When the ifIndex indicates a port: Same as the standard
 When the ifIndex indicates a VLAN: Fixed value of 0
 When the ifIndex indicates a link aggregation: Same as the standard
group have been corrected as follows. [Ver. 2.2.E
interfaces
interfaces
Implementation specifications
Implementation specifications
33
AX1240S-AP-0202C_R2X
group have been corrected as follows.
Implemented
Y/N
Y
Y
Implemented
Y/N
Y
Y