Subscribe to Our Youtube Channel
Related Manuals for WOOSIM WSP-DM360
Summary of Contents for WOOSIM WSP-DM360
- Page 1 WSP-DM360 MODEL (3inch Desktop Mobile Printer) Rev. 1.0 All specifications are subjected to change without notice. http://www.woosim.com...
- Page 2 Copyright ⓒ2017 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc.
- Page 3 WSP-DM360 Rev. 1.0 Introduction The WSP-DM360 is the ideal solution for Mobile banking system , Retail, point of sales, Credit card Transaction, other traveling and mobile computing etc. The general features of WSP-DM360 printer are as follows: Compact size (112.9 X 131.9 X 75.96mm) ...
- Page 4 WSP-DM360 Rev. 1.0 Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ●...
-
Page 5: Table Of Contents
WSP-DM360 Rev. 1.0 CONTENTS 1. Outline ................................. 6 1.1. Model classifications ..........................6 1.2 Symbol ................................6 1.3. Product Part Number System ........................7 1.4. Specifications............................... 8 2. Setting up the printer ............................10 2.1. Printer & Accessories ..........................10 2.2. Printer Features ............................11 2.3. -
Page 6: Outline
WSP-DM360 Rev. 1.0 WSP-DM360 Model Interface A1 : UART/Bluetooth (Standard) Power None : DC 8.4V Standby symbol IEC 5009, the standby symbol(line partially within a broken circle), Indicates a sleep mode or low power state. Direct current symbol This symbol is found on many electronic devices that either require or produce direct current. -
Page 7: Product Part Number System
WSP-DM360 Rev. 1.0 Model name Interface Spec. Wired Wireless RS-232C Bluetooth SC30 IrDA Wireless LAN RS-485 None Parallel None Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 Note) The above table is the interface format which is supported. -
Page 8: Specifications
WSP-DM360 Rev. 1.0 Item Specification Printing method Direct thermal line printing - Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16 Character size - KOR : 24X24(16X24) / CHN, JPN : 24X24 - Font A : 48cpl / Font B : 64cpl / Font C : 72cpl... - Page 9 WSP-DM360 Rev. 1.0 Item Specification Battery Rechargeable 7.4V DC, 1800mAh (Li-ion) (Continue…) Battery duration 1 hour continuous printing Input (100~240V AC 50~60Hz) Battery Charger Output(8.4VDC/0.8A), 4hours full charge time -10°C ~ 50°C (operating) Temperature -10°C ~ 70°C (storage) Environment Conditions...
-
Page 10: Setting Up The Printer
WSP-DM360 Rev. 1.0 & & Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Battery Pack Thermal roll paper WSP-DM360 Battery charger adaptor Communication cable ▼ OPTIONAL Car charger... -
Page 11: Printer Features
WSP-DM360 Rev. 1.0 ▶ Part Name http://www.woosim.com... -
Page 12: Dimensions
WSP-DM360 Rev. 1.0 http://www.woosim.com... -
Page 13: Replacing The Paper Roll
WSP-DM360 Rev. 1.0 Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. -
Page 14: Power Supply
WSP-DM360 Rev. 1.0 The following specification is requested for Power supply. Battery Charger : DC 8.4V/0.8A Avoid using power supply which its power capacity of power current is extremely high. Warning : ● Before installing or removing the battery pack, ensure the printer is OFF. -
Page 15: Recharging The Battery
WSP-DM360 Rev. 1.0 For recharging the battery pack, install the battery pack in the printer. Insert the Battery Charger to the charge connector of the printer. ● While charging the printer, turn off the printer power. NOTE : ● Do not remove the battery during charging. -
Page 16: Set Operation Mode
WSP-DM360 Rev. 1.0 In keeping on pressing the Feed and Power button simultaneously until after the ERROR lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode. (refer to Table 2) POWER button : use for changing OPTION status. - Page 17 WSP-DM360 Rev. 1.0 [Example] The defaults of the printer are : USB / Density Low / Mark No Use / Sensor High / PWDN 5 min slp If a user wants to modify the defaults with Bluetooth / Density High / Mark Use / Sensor Low / PWDN No Use Press FEED &...
-
Page 18: Gap/Hole Sensor Setting
WSP-DM360 Rev. 1.0 Set Mark as GAP / HOLE on mode setting. If feed button keeps being pressed during self “SENSOR SETTING” appears on LCD window and paper keeps coming out “SENSOR SETTING”. If feed button is not pressed after printing more than 3 pages of label Setting is completed as Green and Red LED flash and “COMPLETE”... -
Page 19: Memory Switch Table
WSP-DM360 Rev. 1.0 Mode Option Etc. Mode Option Etc. No use Communi- USB(Pro) 1min Sleep cation Bluetooth 2min Sleep Port Bluetooth(Pro) 3min Sleep Bluetooth(iAP) 4min Sleep Power 5min Sleep Down Density Medium 1min Off High 2min Off No use 3min Off... -
Page 20: Uart(Rs-232C) Version
WSP-DM360 Rev. 1.0 Mode Option Etc. Mode Option Etc. UART Communi- UART(Pro) Sensor Medium1 cation Bluetooth sensitivity Medium2 Port Bluetooth(Pro) High Bluetooth(iAP) No use 9600 1min Sleep 19200 2min Sleep Baud Rate 38400 3min Sleep (bps) 57600 4min Sleep Power... -
Page 21: Interface
WSP-DM360 Rev. 1.0 (Fig.3.1) The WSP-DM360 printer has a UART(RS-232C) or USB interface and is connected by means of a 5 pin mini USB socket. In the following table, the signals present on the Mini- USB socket are listed: ① UART ②... -
Page 22: Bluetooth
WSP-DM360 Rev. 1.0 Category Specification Bluetooth Spec. Bluetooth Ver3.0 / Class2 (10m) Frequency band 2402~2480 MHz Protocol L2CAP, RFCOMM, SDP Profile GAP, SDAP, SPP Category Specification Function Radio frequency transfer Module (IEEE802.11b/g/n standard conformity) Frequency band 2.4GHz Channel 1 to 13 channel... -
Page 23: Insert A Ic Card
WSP-DM360 Rev. 1.0 Insert the Smart Card into slot with micro chip facing down. http://www.woosim.com... -
Page 24: Using The Printer
3. Printer will print out the current status. (F/W version and set contents) 4. And then pattern of characters will be printed out. 5. Self-test will be finished automatically and turned to the standby status. ※ In case printer does not work properly, please contact Woosim customer service center. http://www.woosim.com... -
Page 25: Consumable Parts
WSP-DM360 Rev. 1.0 Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø60mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has Near end mark printing on its near end is recommended. -
Page 26: Revision History
WSP-DM360 Rev. 1.0 Date Version Comments Jun. 05. 2017 Initialize http://www.woosim.com...
Need help?
Do you have a question about the WSP-DM360 and is the answer not in the manual?
Questions and answers