Backyard Discovery Saratoga 30011 Owner's Manual & Assembly Instructions page 52

• (1) WAVE SLIDE ASSEMBLY
• Assemble with hardware as shown.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Step 1: Center the wave slide
assembly in the opening, as shown.
! "
• (3) B - NUT BARREL WH 5/16x5/8 - H100004
• (3) AD - WASHER LOCK EXT 12x19 - H100031
• (3) CM - BOLT WH 5/16x1/2 - H100115
Slide Assembly
50
Slide Assembly
CM
Step 2: Using a drill with a 5/16" bit,
drill a hole through the holes on the
slide and through 'L1' fort floor board.
Slide Assembly
L1
Step 3: Attach the Slide Assembly to
the fort floor using the Safe-T-Fuse
hardware, as shown.