Wear Parts - ESAB Aristo RoboFeed 3004HW Instruction Manual

RoboFeed 3004HW

Wear parts

Item Ordering no.
HJ 1 0455 072 002 Intermediate nozzle
0456 615 001 Intermediate nozzle
HJ 2 0469 837 880 Outlet nozzle
0469 837 881 Outlet nozzle
HJ 3 0191 496 114 Key
HJ 4 0215 701 007 Locking washer
HJ 5a 0459 440 001 Motor gear euro, drive gear
Item Ordering no.
HJ 5b 0459 052 001 Feed/pressure rollers
0459 052 002 Feed/pressure rollers
0459 052 003 Feed/pressure rollers
0459 052 013 Feed/pressure rollers
0458 825 001 Feed/pressure rollers
0458 825 002 Feed/pressure rollers
0458 825 003 Feed/pressure rollers
0458 824 001 Feed/pressure rollers
0458 824 002 Feed/pressure rollers
0458 824 003 Feed/pressure rollers
0458 874 002 Feed/pressure rollers
The rollers are marked with wire dimension in mm, some are also marked with inch.
Item Ordering no.
HJ 6 Washer
HJ 7 Screw
HJ 8 Screw
HJ 9 Washer
HJ 10 0469 838 001 Cover
HJ 11 0458 722 880 Axle and Nut
HJ 12 0459 441 880 Gear adapter
HJ 12 0455 053 881 Gear adapter
HJ 13 0465 129 001 Inlet nozzle
HJ 14 0458 999 001 Shaft
HJ 15 F102 440 880 Quick connector
Welding with aluminium wire
In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire MUST be
used, It is recommended to use 3 m long welding gun for aluminium wire, equipped with appropriate
wear parts.
Rights reserved to alter specifications without notice.
bm54vw
Denomination
Fe, Ss & cored
Al
Fe, Ss & cored
Al
Denomination Wire type
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Cored
Cored
Cored
Al
Al
Al
Al
Use only pressure and feed rollers marked A2, R2 or S2.
Denomination
Ø 16/5x1
M4x12
M6x12
Ø 16/8.4x1.5
Heavy duty with needle bearing
Ø 3mm for 0.6-1.6mm Fe, Ss, Al and cored wire
For Marathon Pac
- 20 -
Wire type
Ø 2.0 mm steel for 0.6-1.6 mm
Ø 2.0 mm plastic for 0.8-1.6 mm
Wire dimensions
Ø 0.6 & 0.8 mm
Ø 0.8 & 1,0 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.4 & 1.6 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.2 & 1.4 mm
Ø 1.6 mm
Ø 0.8 & 0.9/1.0 mm
Ø 1.0 & 1.2 mm
Ø 1.2 & 1.6 mm
Ø 1.0 & 1.2 mm
Notes
TM
Wire dimensions
Groove Roller
typ markings
V 0.6 S2 & 0.8 S2
V 0.8 S2 & 1.0 S2
V 1.0 S2 & 1.2 S2
V 1.4 S2 & 1.6 S2
V-Knurled 1.0 R2 & 1.2 R2
V-Knurled 1.2 R2 & 1.4 R2
V-Knurled 1.6 R2 & 2.0 R2
U 0.8 A2 & 1.0 A2
U 1.0 A2 & 1.2 A2
U 1.2 A2 & 1.6 A2
U 1.0 A2 & 1.2 A2
S0463 280/E20120808/P24
© ESAB AB 2012