Add-Ons; Bluetooth; Wireless Modem; Oximeter - DeVilbiss DV63 Standard Plus Instruction Manual

FEATURES AND SETTINGS

Add-Ons

This menu allows the connection of DeVilbiss approved
devices such as DV6WM Wireless Modem, Nonin
WristOx2 wireless oximeter, and other devices.
®

Bluetooth

®
Bluetooth allows connection of Bluetooth enabled
items such as wireless modem or oximeter.
1. Select Bluetooth and
press to select On.
2. Select search.
3. Searching for Bluetooth
devices. Shows list of oximeters
in range. Click the item serial
number to pair with the CPAP.
For Airline Use – Select Bluetooth
and press to select Off.
EN - 46

Wireless Modem

®
Information on optional
DV6WM.
1. Select Wireless Modem
2. Wireless modem
information screen
Shows signal strength
of Bluetooth and wireless
modem as well as battery
status of modem.
NOTE – Refer to DV6WM
Instruction Guide for details.

Oximeter

Information on optional Nonin WristOx2 wireless oximeter.
1. Select Oximeter
2. Oximeter information
screen. NOTE – Refer to
Oximeter Instruction Guide
for details.
NIGHTLY
1. Connect wireless oximeter to
CPAP and place probe on finger.
2. Wait until your CPAP display
shows the pop-up message
"Oximeter Logging Started"
which means your CPAP is
recording data from the
oximeter.
NOTE – If more than one
person in the house is using a
wireless oximeter, each person
must do this check at a different
time.
3. After recording is finished,
remove finger probe and
disconnect the sensor cable from
the oximeter. The CPAP will
display a message 'Oximeter
Logging Stopped' and beep once.
SE-DV64-HE