Master Volume Settings; Brightness Settings; Enable Menu - DeVilbiss DV63 Standard Plus Instruction Manual

FEATURES AND SETTINGS
CPAP Settings Menus

Master Volume Settings

Allows adjustment of alert volume for
patient messages.
1. Select Volume
2. Set Master Volume
(sound level) from 0-100%
0 = Off (mute)
EN - 44

Brightness Settings

Allows adjustment of display and controls brightness.
1. Select Brightness 3. Select Active or
Standby
2. Select Display
4. Select Brightness Level
(brightness of display
area) or Controls
(brightness of top buttons,
heater-on indicator, and
rotary knob)
Active = Brightness during user activity (when using
buttons or menus). Settings from 10% to 100% (must be
equal to or higher than Standby brightness)
Standby = Brightness when no user activity (idle).
Settings from 0% to Active (must be equal to or lower than
Active brightness)
Display and controls change to Standby brightness after 2
minutes of no activity.
NOTE – If Standby controls brightness is set to 0, the
heater on indicator remains on at a low level.

Enable Menu


= Enabled (ACTIVATED)
Allows Auto-Start/Stop feature and Notifi cations to be
activated or deactivated. Activating Auto-Start/Stop allows you
to start therapy by breathing into your mask and to stop
therapy by removing your mask. Activating Notifi cations will
ensure they are displayed on your screen when generated.
1. Select Enable and then
3. Auto-START 
select desired options
4. Notifi cations
2. Auto-STOP  NOTE-
Patient Messages for details.)
If Auto-STOP is enabled,
Auto-START is
automatically enabled.
(Refer to

SE-DV64-HE