Pitco SG Series Solstice Service Manual page 73

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
8. Turn the mounting bracket over and remove the
two (2) screws, which hold the actuator, using a
flathead screwdriver.
9. Remove all connections from the 3-way return
valve using a 1/16 inch wrench.
SG/SSH Series Service Manual
10. Remove the cotter pin on return valve using
needle-nose pliers.
11. Pull the red return handle out of the fryer.
12. Remove the two (2) screws, which hold the
magnet on the handle, using a flathead
screwdriver.
13. Reinstall the new return switch by following
steps 1 through 12 in reverse.
73