Replacing Seal Kit - Pitco SG Series Solstice Service Manual

High efficiency gas fryers

Hide thumbs Also See for SG Series:

Table of Contents

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers

13. Remove existing piping from old filter pump

using two adjustable wrenches.

Replacing Seal Kit

1. Remove the four (4) bolts on filter pump using

7/16 inch open-ended wrench.

2. Remove the filter pump head.

SG/SSH Series Service Manual

14. Reinstall a new filter pump by following steps 1

through 13 in reverse.

3. Replace the seal.

4. Reinstall the filter pump head to the motor by

following steps 1 through 2 in reverse.

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting

Do you have a question about the SG Series and is the answer not in the manual?

Ssh series