Pitco SG Series Solstice Service Manual page 56

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
6. Remove the two (2) screws that hold the wires
using a flathead screwdriver.
7. Remove the capillary nut using a 5/16 inch
close-ended wrench.
8. Remove the grand nut using a 9/16 inch open-
ended wrench.
SG/SSH Series Service Manual
9. Apply Teflon paste to the fitting.
10. Remove and replace the temperature bulb.
11. Finger tighten the fitting.
56