Replacing The Thermostat - Pitco SG Series Solstice Service Manual

High efficiency gas fryers

Hide thumbs Also See for SG Series:

Table of Contents

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers

Replacing the Thermostat

1. Remove the two (2) bolt clamp screws that hold

down the temperature probes using a Phillips

screwdriver.

Thermostat

2. Remove the two (2) screws on the thermostat

using a 5/16 inch socket.

SG/SSH Series Service Manual

Hi-Limit

3. Remove the thermostat knob.

4. Remove the two (2) screws that hold the

thermostat using a Phillips screwdriver.

5. Pull out the thermostat.

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting

Do you have a question about the SG Series and is the answer not in the manual?

Ssh series