Replacing The Dvi Switch - Pitco SG Series Solstice Service Manual

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
Replacing the DVI Switch
1. Remove the two (2) screws, which hold the
proximity sensor on the drain handle, using a
flathead screwdriver.
2. Remove the two (2) screws, which hold the
actuator, using a flathead screwdriver.
SG/SSH Series Service Manual
3. Replace the DVI switch ensuring a 1/4 inch gap
between the actuator and the magnet.
4. Follow steps 1 through 3 in reverse to reinstall a
new DVI.
35