Table of Contents
Advertisement
Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
Checking the Burner Manifold Gas Pressure
Taking a Supply Gas Pressure Reading
1. Unscrew and remove the gas supply plug with a
3/16 inch hex wrench.
2. Finger tighten the test fitting into the test port.
SG/SSH Series Service Manual
3. Finish tightening the test fitting using a 7/16
inch open-ended wrench.
4. Connect the manometer.
14
- Quick Links:
- Heating System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SG Series and is the answer not in the manual?