Percussion Play Congas Installation Instructions

Outdoor musical instruments for everyone, everywhere, ground fixed
Hide thumbs Also See for Congas:

Advertisement

Installation Instructions

Ground Fixed
Congas
Page 1 of 3
Instrument
Components:
x4
M10x50 Security Screw
x4
M10x50x3 Square washer
x2
200 Mount
x2
250 Mount
Metric Conversion:
250mm/ 10"
400mm/ 16"
600mm/ 24"
700mm/ 28"
800mm/ 31"
Weight of heaviest part
1.5m/ 59"
Weight of heaviest part
Weight of heaviest part
Played with hands
BS EN 1176
(1.1)
3.8kg
(Large drum Small Congas)
4.5kg
(Large drum Medium Congas)
5.2kg
(Large drum Large Congas)
Ground Fix
Components:
M10x200 Bolt
1. Attach the steel leg to each
of the congas with the
M10x30 security screws,
square washers and HDPE
mounts. (1.1) (See Assembly
Guide)
2. Attach Ground Fixings to
legs(1.2) (See Ground Fix Post
Installation Sheet)
3.Excavate1 hole for the Steel
leg 250mm diameter by
400mm deep, in desired
(1.2)
location upon decision from
customer.
4. Locate (lower) legs into hole
making sure they are vertical
and level prior to concreting in
place.
5. Once happy with location of
the Instrument, fill hole using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines.
x2
x4
M10 Nut
1.5m
1.5m
Small – 600mm
Medium – 700mm
Large- 800mm
S,M,L
Ground Surface
400mm
Spares available form
percussionplay.com
or from your
local distributor
Install Instrument
with 1.5m free space
(from widest point)
around it.
14.8 Kg
15 Kg
20 Kg

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Congas and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Percussion Play Congas

  • Page 1: Installation Instructions

    Installation Instructions 1. Attach the steel leg to each of the congas with the M10x30 security screws, Install Instrument square washers and HDPE 1.5m 1.5m with 1.5m free space (from widest point) mounts. (1.1) (See Assembly around it. Guide) Ground Fixed 2.
  • Page 2 Assembly Guide PPCONG Tools: TX 45 Driver Bit Ground Fixed PPCONG PLAN Thread Lock Solution Congas Required (Not Supplied) Page 2 of 3 COMPONENTS LIST: (1.1) M10x50 Pin torx X4 Instrument M10x50x3 square washer X4 Components: M10 Nut X4 M10x200 Threaded Bar X2...
  • Page 3 Ground Fix Post Installation Ground Fixed Congas Page 3 of 3 Excavate a hole with a Insert M10x 200 Threaded Fix M10x 200 Threaded 250mm diameter tapering bar into pre drilled holes bar in place using M10 down to 350mm diameter...

Table of Contents