Percussion Play CAVATINA Installation Instructions Manual

Installation Instructions

Ground Fixed
Cavatina
Page 1 of 3
Instrument
Components:
x4
M8 Nyloc Nut
x2
M6x20 Security Screw
x4
2 Part Cover Cap
x1
M6 Saddle Strap
Metric Conversion:
250mm/ 10"
300mm/ 12"
450mm/ 18"
700mm/ 28"
850mm/ 33"
1.5m/ 59"
Weight of heaviest part
BS EN 1176
(1.1) (1.1)
(1.3)
11kg (Cavatina)
Ground Fix
Pair Small Red
Beaters X1
Components:
1. Attach the steel legs to the
base of the instrument with
the M8 Nyloc Nuts and 2 part
security caps. (1.1) (See
Assembly Guide)
2. Attach Ground Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
3.Excavate 1 hole for the Steel
legs 250mm diameter by 350-
500mm deep depending on
Key stage, in desired location
upon decision from customer.
(1.2)
4. Locate (lower) leg into holes
making sure they are vertical
and level prior to concreting in
place.
5. Once happy with location of
the Instrument, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines.
6. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
x2
x4
M10x200 Bolt M10 Nut
Install Instrument
1.5m 1.5m
with 1.5m free space
(from widest point)
around it.
KS1 – 700mm
KS2 – 850mm
KS1,2
Ground Surface
KS2 - 300mm
KS1 - 450mm
Spares available form
percussionplay.com
or from your
local distributor
19.5 Kg