Parameters; Parameter Overview - Danfoss 101N0715 Operating Instructions Manual

4
TOOL COOL ®
BD Controller
101N07xx Series
24 V DC
4.1 Parameter
Overview
Parameter Group Parameter
Main functions Main switch
Battery
Battery cutout level
protection
Battery cutin diff.
Cutout delay
Cut-in level
Supply voltage
Compressor Requested speed
Start delay
Start speed
Start time
Compressor speed
Condenser fan Cond. Fan voltage
Fan speed
Fan start delay
Fan stop delay
Fan forced ON
Detect missing fan
Fan speed
Evaporator fan Evap. Fan voltage
Fan speed
Fan start delay
Fan stop delay
Fan forced ON
Detect missing fan
Fan speed

4. Parameters

The user can change settings and observe real-time measurements (read-only)
in the following parameters.
The table in 4.1 Parameter Overview is intended for easy reference.
For more detail, please refer to 4.2 Description of Parameter Groups.
Description
On/Off regulation of power supply to
controller
Battery protection cut-out voltage
level
Voltage difference between battery
cut-in and cut-out
Time to cut-out when non-critical
battery protection implemented
Calculated value.
Cutin = Cutout + Diff.
Real-time voltage measured
on + & - terminals
Compressor speed and therefore
capacity definition
Time to start after
compressor is switched ON
Optional startup speed lower than
Requested speed, during the period
Start time.
Period of time elapsing after startup
of compressor until Requested speed
is reached
Real-time speed (+/- 10%)
Supply voltage to the
condenser fan.
Condenser fan speed synchronized
with compressor operation
Time to start as a function of
Thermostat
Time to stop as a function of
Thermostat
Force condenser fan continuously
ON or OFF
Detect whether condenser fan is
connected
Real-time condenser fan speed
Supply voltage to the evaporator fan.
Evaporator fan speed
synchronized with
compressor operation.
Time to fan start as a
function of Thermostat
Time to fan stop as a
function of Thermostat
Force evaporator fan
continuously ON or OFF
Detect whether evaporator fan is
connected
Real-time evaporator fan speed
DEHC.PS.100.I1.02
Default Max value Min value
OFF ON OFF
21.3 27 19
3.9 10 0.5
3 60 0
4000 4000 2500
4 240 2
2500 4000 2500
30 600 0
24 31 12
100 100 40
0 240 0
0 240 0
OFF ON OFF
OFF ON OFF
24 31 12
100 100 40
0 240 0
0 240 0
OFF ON OFF
OFF ON OFF
Step Unit Type
1
0.1 Volt Setting
0.1 Volt Setting
1 Seconds Setting
0.1 Volt Measurement
0.1 Volt Measurement
100 rpm Setting
1 Seconds Setting
100 rpm Setting
1 Seconds Setting
1 rpm Measurement
1 Volt Setting
10 % Setting
1 Seconds Setting
1 Seconds Setting
1 Setting
1 Setting
1 % Measurement
1 Volt Setting
10 % Setting
1 Seconds Setting
1 Seconds Setting
1 Setting
1 Setting
1 % Measurement
13