User Interface; Operation - Danfoss 101N0715 Operating Instructions Manual

4
TOOL COOL ®
BD Controller
101N07xx Series
24 V DC

3.1 User interface

3.2 Operation

3. Tool4Cool® software interface
The controller can be programmed and optimized from a PC using the Tool4Cool® software
An example of the Tool4Cool® user interface showing the main parameter groups of the BD350GH
compressor is shown below.
Example:
The Tool4Cool® software enables the user to observe and document certain aspects of the compressor
operation via the controller. The output of the software is in the form of data logs and plots.
Using Tool4Cool® the user can also change the settings of the controller parameters, and copy settings
from one controller to another.
Please refer to the Tool4Cool® LabEdition Operating Instructions for operation instructions.
DEHC.PS.100.I1.02 11