Table of Contents
Advertisement
Operating Instructions
WARNING
To reduce the risk of fire:
•
DO NOT DRY articles containing foam rubber or
similarly textured rubberlike materials.
•
DO NOT DRY plastics, anything containing wax
or chemicals such as mops and cleaning cloths,
or anything dry-cleaned at home with a dry-
cleaning solvent.
•
DO NOT TUMBLE fiberglass curtains and
draperies unless the label says it can be done. If
they are dried, wipe out the cylinder with a damp
cloth to remove particles of fiberglass.
WARNING
To reduce the risk of serious injury, allow cylinder
to stop before cleaning lint screen.
Emergency Stop Button On CE Models
All CE approved OPL tumble dryers are factory equipped with
an emergency stop button located on the front panel. Refer to
Figure 28 .
Part No. 70476301ENR6
Operating Instructions
W076
W412
©
Published by permission of the copyright owner - DO NOT COPY or TRANSMIT
025, 030, 035 and 055 Series
Series
1
Emergency Stop Button
Figure 28
To operate emergency stop button:
•
Press red emergency stop button to stop all action.
•
To restart machine, pull red emergency stop button out and
press START pad or button.
NOTE: Activation of the emergency stop button
stops all machine control circuit functions, but
DOES NOT remove all electrical power from
machine.
Operating Instructions
WARNING
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
IMPORTANT: This appliance shall not be used to dry
off solvents or dry cleaning fluids.
1.
Clean Lint Screen/Compartment
a.
Remove any accumulated lint from the lint screen and
compartment.
Operating Instructions
T30 and T45
W727
86
Advertisement
Table of Contents
