Danger Information - KERN DAB 200-2 Operating Manual

5.4 Danger Information

!
The moisture analyser is used to analyse the moisture content of materials.
This instrument must be used exclusively for this purpose. Any other usage
may cause a risk to personnel, damage to the instrument or other material
damage.
!
The moisture analyser should be used mainly for the drying of aqueous
substances.
!
The moisture analyser may not be used in a hazardous area.
!
Do not use the moisture analyser in an explosive environment.
!
The operation and maintenance of the moisture analyser is restricted to
trained competent specialist staff.
!
Carefully read this operation manual before setup and commissioning, even if
you are already familiar with KERN instruments.
!
Never make any modifications or design changes to the equipment
whatsoever. Always use original spare parts and accessories.
!
Make sure that liquids cannot penetrate the interior of the device, the terminals
at the rear of the device and the connected peripherals (such as printer, PC).
If you spill liquid on the device, disconnect it immediately.
Afterwards do not operate the moisture meter and have it checked by a
competent KERN stockist before any further use.
!
Ensure correct installation of all components, see chap. 7.3
!
Careful when removing the sample. The sample itself, the sample dish and the
heating unit may be very hot.
!
Use the sample retainer at all times as it allows safe working and prevents
burns.
!
Individual parts of the case (e. g. the ventilation grids) may heat up
considerably during operation.
DAB-BA-e-1813
Hazards during and after measuring
13