Black Menu Factory Default Settings; Table 6: Black Button Menu Factory Default Settings - Tektronix SPG700 User Manual

Black menu

Black menu factory default settings

48
The following table shows the settings for the Black menu that are reset when
you use the Preset submenu to recall the factory default settings. (See page 112,
Presets submenu.)

Table 6: Black button menu factory default settings

Menu item name
Format
1
Field Reference
Timing
Timecode 1
Blank On Reference Unlock
Blank On Reference Unlock Delay
Black 1–3: HD Tri-Level Sync
1
These settings appear only for non-HD formats.
2 This setting appears only when the format is set to NTSC.
3
These settings appear only for the Black 2 output.
Settings
NTSC
Disable
Vertical: 0 Line(s)
Horizontal Coarse: 0.0 μsec
Source: Disable
Offset: +00:00:00:00
VITC 1 Line
Line Number:
NTSC/NTSC-J: 14
PAL: 19
Output: Disable
VITC 2 Line
Line Number:
NTSC/NTSC-J: 16
PAL: 21
Output: Disable
Enable 30 Drop Frame: Disabled
3 Disabled
3 00:00:10
Non-integer
2
SPG700 User Manual