Advertisement
CONTROL FUNCTIONS RESERVED FOR NORMAL USERS
Timed activation of the output associated with the group to which he/she
belongs.
WARNING:
the relay codes 0-9 to use in the SMS commands or in programming using the Jcall Manager software correspond to
terminals OUT1-OUT10 on the board according to the following table:
10.
Programming using the Jcall Manager management software
The Jcall Manager software allows Jcall to be programmed entirely via a PC and can be downloaded from the download area at
the following web address:
Jcall Manager allows you to:
•
enter, delete and modify users
•
enter, delete and modify groups of users (e.g. time bands enabled for access)
•
modify the settings of the Jcall board
•
display the access log
•
access the board diagnostics functions
To program the board, it must be connected to the PC using a Mini USB type B cable (not included).
11.
Programming via the Internet: Jcall WebManager
The Jcall WebManager platform allows the Jcall control unit to be programmed and monitored remotely via the Internet using the
GPRS connection without the need for cables.
For further information on the Jcall WebManager platform, please contact your local FAAC sales representative.
12. Technical data
Operating temperature
Power supply
Average current consumption
Output port for programming and monitoring via PC
Number of main board inputs/outputs
Maximum number of outputs using the expansion card
Frequency band
Board dimensions
Board weight, approx.
maximum OUT terminal voltage
maximum OUT terminal current
Peripheral power supply voltages available
Maximum available peripheral power supply current
Input voltage
Input current
Output voltage
Output current
Use
Power supply type
Power supply dimensions
Power supply weight, approx.
Connector
SMA antenna cable length
SMA antenna fastening
SMA antenna height
For further information, please see the download area at
sales representative.
Relay code
0
1
2
3
4
5
6
7
8
9
http://jcallwebmanager.faacgroup.com
Board terminal
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
OUT10
Jcall board
from -30°C to +70°C
12V DC
minimum: 90 mA, maximum: 300 mA
Mini-USB type B serial port
4 digital inputs, 2 relay outputs
Up to 10 relay outputs
Quad-band GSM 850/900/1800/1900MHz
136 mm x 108 mm x 30 mm
100g
24 VAC/VDC
1 A
5V, 12V
240mA@12V, 500mA@5V
Power supply
88-264VAC / 47-63Hz
400mA@230VAC
12V DC
2.1 A
Internal
Stabilised switching
78x51x28 mm
200g
GSM Antenna
SMA, UFL
3m
Magnetic
7 cm
http://jcallwebmanager.faacgroup.com
SYNTAX
OPEN
and/or contact your local FAAC
Advertisement
