Description And Technical Specifications - FAAC 615 Manual

ENGLISH
The 615 automatic system consists of an aluminium beam
with reflex reflectors, and a steel upright subjected to
cataphoresis treatment and painted with polyester paint.
The upright houses the hydraulic operator and is designed
also to house the electrical control equipment. The operator,
which moves the beam, consists of a hydraulic pump unit
and a double-acting cylinder.
The system is supplied with an adjustable anti-crushing
protection safety device. It also includes a device stopping
the beam in any position, and a manual release command
for use in case of power cuts or faults.
The beam balancing spring and the electronic control unit
(not supplied) must be ordered with reference to the sales
price list.
The 615 automatic system was designed and built for
controlling vehicle access. Do not use for any other purpose.

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS

7
9
10
11
12
13
14
foundation plate
barrier upright
electronic equipment
(not supplied)
emergency release
torque adjustment screws
double-acting piston
stroke limit screw
615 AUTOMATIC SYSTEM
8
7
6
5
4
3
2
1
fig.1
beam
equaliser
oil filling plug
breather screw
balancing spring
spring adjustment tie-rod
hydraulic pump unit
TABLE 1Technical specifications of "615 barrier"
BARRIER MODEL
Beam max. length (m)
Max. opening time (sec)
Angle speed (rad/sec)
Pump flow-rate (l/min)
Max. torque (Nm)
Types of beam
Use frequency (at 20°C)
Max.consecutive cycles (at
Power supply
Absorbed power (W)
Type of oil
Oil quantity (Kg)
Winding
thermal protection
Anti-crushing protection system
Ambient temperature
Hood protective treatment
Hood paint
Protection class
Weight (Kg)
Upright overall dimensions
LxHxD(mm)
Electric motor technical specifications
RPM
Capacity (W)
Absorbed current (A)
Power supply
1.1. MAXIMUM USE CURVE
The curve makes it possible to establish maximum work time
(T) according to use frequency (F).
E.g. The 615 automatic system can operate non-stop at a use
frequency of 50%.
To ensure efficient operation, operate in the work range
below the curve.
Important: The curve is obtained at a temperature of 20°C.
Exposure to the direct sunlight can reduce use frequency
down to 20%.
Calculation of use frequency
The percentage of effective work time (opening + closing)
compared to cycle total time (opening + closing + pause
times).
Calculation formula:
Ot + Ct
%F =
Ot + Ct + Pt + It
where:
Ot = opening time
Ct = closing time
Pt = pause time
It = interval time
between a
full cycle and
the next.
9
ENGLISH
615-1,5 l/min 615-3 l/min
5
5,7
0.28
1.5
400
Rigid/Skirt
Articulated
50%
20°C 220
)
230V~ (+6 -10 %) 50Hz
220
FAAC XD 220
0,9
120° C
standard by-pass valves
-20 to +55 °C
cataphoresis
Polyester RAL 2004
IP 44
34 (sale package)
270 x 1015 x 140
1400
220
1
230V~ (+6 -10 %) 50Hz
X 100
2,5
2,9
0,54
3
300
Rigid
40%
340
2800
10