Installation; Mechanical Installation - Lenze SMVector Reference Manual

3

Installation

3.1 Mechanical Installation
1. Ensure that for safety reasons the AC supply has been disconnected before opening the
terminal cover.
2. Insert the CANopen option module in the terminal cover and securely "click" into position as
illustrated in Figure 2.
3. Wire the network cables as detailed in paragraph 3.3, Electrical Installation, to the connector
provided and plug the connector into the option module.
4. Align terminal cover for re-fitting, connect the module umbilical cord to the drive then close
the cover and secure, as shown in Figure 3.
NEMA 1 (IP31) Models
1 2 3 4 5
Figure 2: Installing the CANopen Module
NEMA 1 (IP31) Models
Figure 3: Re-installing the Terminal Cover
Installation
0.5 Nm/ 4.5 lb-in
< _ 2.8 mm
(12-22 AWG)
7mm
NEMA 4X (IP65) Models
5
NEMA 4X (IP65) Models
CMVCAN01B