Lenze SMVector Reference Manual page 2

About these instructions
This documentation applies to the CANopen communications option for the SMVector inverter
and should be used in conjunction with the SMVector Operating Instructions (Document SV01)
that shipped with the drive. These documents should be read in their entirety as they contain
important technical data and describe the installation and operation of the drive and this option.
© 2007 Lenze AC Tech Corporation
No part of this documentation may be copied or made available to third parties without the
explicit written approval of Lenze AC Tech Corporation.
All information given in this documentation has been carefully selected and tested for compliance
with the hardware and software described. Nevertheless, discrepancies cannot be ruled out.
We do not accept any responsibility nor liability for damages that may occur. Any necessary
corrections will be implemented in subsequent editions.
SMVector ® , and all related indicia are trademarks of Lenze AG in the United States and other
countries.
CAN™, CANopen™ and all related indicia are trademarks of CAN in Automation (CiA).
CompoNet™, DeviceNet™, CIP™, CIP Safety™, CIP Sync™, CIP Motion™, DeviceNet Safety™
and EtherNet/IP Safety™ and all related indicia are trademarks of the ODVA (Open DeviceNet
Vendors Association). EtherNet/IP™ is a trademark used under license by ODVA.