Factory Reset; Communication Settings; Language; Specifications - NovaStar VX2U User Manual

OLED Brightness
Adjust the gray scale of OLED display.
Hardware Version
Check the hardware version of VX4U. If new version has been published, LCT-Mars
can be connected via PC and the hardware program of VX4U can be upgraded.

Factory Reset

Reset to factory default settings.

Communication Settings

Set the communication mode and network parameters of VX4U.
The communication modes include USB priority and LAN (Local Area Network)
priority. When VX4U is connected to USB and Ethernet control interfaces
simultaneously, USB control will be used if it is set to USB priority, otherwise, LAN
control will be used if it is set to LAN priority.
Network parameters can be set both manually and automatically. Ensure that the IP
address is not conflict with other devices when setting parameter manually.

Language

Switch Language.

8 Specifications

Inputs
Qty
Port
VX2U
VGA 2
DVI 1
CVBS 2
HDMI 1
DP 1
USB 1
V X 2 U / V X 4 U U se r 's M a n ua l
Resolution Specification
VX4U
2 VESA Standard, max. supported input1920×1200@60Hz
1 VESA Standard (supports 1080i input), supports HDCP
2 PAL/NTSC
EIA/CEA-861 standard, in accordance with HDMI-1.3
1
standard, support HDCP
1 VESA Standard
Multimedia file formats: avi, mp4, mpg, mkv, mov, vob
Image file formats: jpg, jpeg, bmp, png
1
Multimedia coding formats: MJPEG, MPEG-1, MPEG-2,
MPEG-4, DivX, H.264, Xvid
-16-