Model Description; Appearance; Front Panel - NovaStar VX2U User Manual

1 Model Description

Model Description (input interface type)
VX2U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1
VX4U Inputs: DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, USB×1
Tips: The number, types, functions and specifications of the interfaces of VX2U and VX4U
are basically the same. In this manual, VX4U is described as an example.

2 Appearance

Front Panel

① : Power switch
② : Operation screen(Please see details in the Chapter: Main Interface.)
③ : Knob: Pressing the knob means Enter or OK and rotating the knob represents
selection or adjustment.
④ : ESC: Escape current operation or selection.
⑤ : Four control shortcuts
PIP: Enable/Disable PIP. The indicator light on denotes PIP is enabled, otherwise,
PIP is disabled.
SCALE: Enable/Disable screen scaling. The indicator light on denotes scale function
is enabled, otherwise, it is unavailable.
MODE: Shortcut menu for loading or saving dmodels. The indicator light is on
when entering the model or shortcut menu. The indicator light is off after exiting.
TEST: Shortcut for enabling or disabling test patterns. In case of entering test
picture, the indicator light is on, otherwise, the light is off.
⑥ : Shortcuts for switching of 10 signal input source. Press to set as the main
screen input source, and long press to set as PIP input source. The setting result
can be viewed on the operation screen while setting.
V X 2 U / V X 4 U U se r 's M a n ua l
-1-