Rs 232 Connections - KEPCO BOP 6-125MG/ME Quick Start Manual

FIGURE 2. BOP 1KW SERIES, FRONT PANEL CONTROLS AND INDICATORS
RS 232 CONNECTIONS. Connect
1KW to a modem using a Null Modem patch cable at
the RS 232 port located on the rear panel (See Fig-
ure 3). A Null Modem cable is not required for older
KEPCO, INC.  131-38 SANFORD AVENUE  FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000  FAX (718) 767-1102
090418
E
N
T
E
R
the BOP
http://www.kepcopower.com   email: hq@kepcopower.com
228-1692 REV 8
MAC computers with D-sub serial port in which the
RXD and TXD line transposition is accomplished via
external hardware. The default baud rate is 9600;
refer to the Operator Manual to change it.
7