Glass Door Front Removal / Installation; Glass Door Side Removal - Mqvlb48 Peninsula Bay - Marquis MQVL48LP Installation Instructions Manual

MQVL48 / MQVLB48 Glass Door Front Removal / Installation
To remove Glass Door Front:
1. Use a 3/8" wrench or socket to
remove the Side Cover Panels
from MQVL48 Single Side or
the Corner Kit side of
MQVLB48.
Also, use a 3/8" wrench or
socket to remove the Corner
Covers from MQVLB48
Peninsula Bay fireplace.
2. Remove the [Qty 4] Wing Nuts
on the Upper Glass Retainer
above the Glass Door Front and
remove the Retainer.
3. Loosen the [Qty 4] Wing Nuts
on the Lower Glass Retainer
but do not remove. Glass Door
Front can now be lifted out of
the fireplace.
4. Installation is the reverse of
these steps.
NOTE: Wing Nuts and 3/8" Nuts
should be tightened no more than
1/8 to 1/4 turn past tight as glass
could break.
MQVLB48 Peninsula Bay
To remove Glass Door Side (for
Corner Kit Installation):
1. Remove Glass Door Front as
described above.
2. Use a 3/8" wrench or socket to
remove the Side Glass Cover.
3. Remove the [Qty 2] Wing Nuts
on the Upper Glass Retainer
and remove the retainer.
4. Remove the Glass Door Side.
5. Remove the [Qty 2] Wing Nuts
on the Lower Glass Retainer
and remove the retainer.
Refer to VLBCK48 Corner Kit
Installation Instructions to install
Corner Kit.
NOTE: None of the components
from the Side Glass Door will be
reused when the Corner Kit is
installed.
Use caution when working with
glass. Wear gloves.
Suction Cups Recommended.
Corner Cover
Upper Glass Retainer
X2
Glass Door Side Removal
Lower Side Glass Retainer
Side Cover
X4
Side Glass Cover
Upper Side Glass
Retainer
X2
Panel
X2
X2
31