Using Tile Lip; Facing Requirements - Marquis MQVL48LP Installation Instructions Manual

MQVL48 Single Side
A Tile Lip is supplied for
attachment above the
fireplace opening. This can be
used as a standard tile edging
or as a mount bracket for
other surfaces like drywall or
plywood.
Set to desired height and
attach through holes in face of
fireplace.
84 Square Inches Free Air Opening
MQVL48 – Single Side
Unit may be covered with combustible material (i.e. drywall) up to the fireplace opening.
Option A: Open Chase at Ceiling (MIN 151 Sq. In.)
Option B: Vent Slot in Chase (MIN 151 Sq. In.)
Do not drive screws into
fireplace front. Facing
materials must be attached
to framing.
OPTIONAL
COMPONENTS
Lower Vent Slot (MIN 84 Sq. In.) is REQUIRED for ALL Installations.

- Using Tile Lip

Opening must not be
blocked by floor covering

-Facing Requirements

MAX 2" Below Ceiling
IPI
VALVE
SYSTEM
Do not drive screws into
these highlighted areas.
Drywall
Drywall
22