Attachment Tilt Switch; Frame Sway Control Handle; Auxiliary Attachment Control - Xtreme xr1255 Operation And Safety Manual

Operator Cab

Attachment Tilt Switch

The Attachment Tilt Switch located on the top of the boom
control handle controls attachment tilt functions.
Figure 46. Attachment Tilt Switch - (A) Tilt Down (B) Tilt Up
The Attachment Tilt Switch:
• Controls the attachment tilt functions by rolling the
switch upward and downward. For the attachment to
tilt up, roll switch downward. For the attachment to tilt
down, roll switch upward.
• Is a variable speed switch. Function speed is proportional
to how far the switch is rolled. The more the switch is rolled
in the appropriate direction, the faster the corresponding
function will occur.
NOTE: The attachment carriage will retain any set angle
throughout boom raising, lowering, retracting, or extending
operations.
Figure 47. Frame Sway Control Handle
1
FRONT
OF
VEHICLE
2

Frame Sway Control Handle

Function
Frame sway right
Frame sway left
NOTE: Lock the frame sway by placing the travel select lever
in NEUTRAL or applying the service or parking brake.
NOTE: Maximum frame sway is 220 overall or 110 each
direction, left and right.
The forklift includes a Frame Sway Override
switch. Improper use of the Frame Sway
Override switch could cause death, serious
injury, or property damage.

Auxiliary Attachment Control

The Auxiliary Attachment Control lever controls the functions
of approved optional attachments that can be mounted to
the forklift and require hydraulic supply for operation.
Figure 49. Auxiliary Attachment Control Lever
43
Purpose
Move handle right
Move handle left
Warning
The frame sway feature
becomes locked
will not operate when
the boom is raised 40°
or more. Pressing the
Frame Sway Override
switch (the trigger) on
the control handle will
override the
feature and allow slow
frame sway.
Figure 48. Frame Sway Over-
Operation Manual
and
lockout
ride Switch