Display Features - Xtreme xr1255 Operation And Safety Manual

Operator Cab
R. OIL PRESSURE GAUGE
The Oil Pressure Gauge indicates the engine oil pressure.
Normal engine oil pressure is between 40 and 80 psi. If the
Oil Pressure Gauge shows abnormal readings, stop the forklift,
follow proper shut down procedures, tag forklift with "Do Not
Operate" tags, and have a qualified mechanic service or repair
the forklift BEFORE placing it into service again.
S. STOP INDICATOR (RED)
The Engine Stop Indicator is displayed with a flashing Engine
Warning Indicator when the engine is either shut down or an
engine shutdown is imminent.
T. CHECK ENGINE/GENERAL WARNING INDICATOR
In case of any engine errors, the general error lamp of the
engine will be activated. Whenever the error lamp is active, a
fault code is stored in the error memory.
Two different states are possible:
• Solid on - Errors that allow continuing engine operation
with minor restrictions.
• Blinking - Errors that cause an engine shut down or shut
down request.
Emission related errors of the EAT system will also be dis-
played on the Status Display and the malfunction indicator
will come on.
The Check Engine Indicator will be displayed when there is a
minor engine or ESC fault. Refer to the Operation section on
Warning Indicators and Fault Codes and the Engine Indica-
tor Chart (Fig. 69).
U. EXHAUST SYSTEM CLEANING (ESC) INDICATOR
The Exhaust System Cleaning (ESC) Indicator will be displayed
when a manual regeneration is recommended or required.
Refer to the Operation section on Warning Indicators and
Fault Codes and the Engine Indicator Chart (Fig. 69).
V. HIGH EXHAUST TEMPERATURE (HEST)
The High Exhaust Temperature (HEST) indicator will be
displayed when the exhaust temperature is higher than
normal. Refer to the Operation section on Warning Indicators
and Fault Codes and the Engine Indicator Chart (Fig. 69).
W. ESC REGEN DISABLED
The ESC Regen Disabled indicator will be displayed if the ESC
Regen has been manually disabled by the user.
X. MESSAGE / STATUS DISPLAY
Displays engine status messages or additional warnings.
Y. ENGINE SHUTDOWN
The Engine Shutdown will be displayed when there is a severe
engine or ESC fault. Refer to the Operation section on Warning
Indicators and Fault Codes and the Engine Indicator Chart.
Z. ENGINE WARNING
The Engine Warning Indicator will be displayed when there is
an engine or DPF fault. Refer to the Operation section, Fig 69.
. LEFT SIDE / RIGHT SIDE OUTRIGGER DOWN
∑
Indicates that the outrigger on the left side and/or the one on
the right side of the forklift is locked in the DOWN position.
π
. BACKUP CAMERA (OPTIONAL)

Display Features

The display allows the operator to view vital engine
information and other critical functions, including gauge
display, engine diagnostics to monitor engine condition and
performance, fault codes, and warning lights.
POWER UP
When the ignition is turned on, the display powers up and
defaults to GAUGE DISPLAY mode. The display should remain
in this mode for normal operation.
Soft Buttons
Menu Button
Fig 30. Power Up
MAIN MENU
Pressing the MENU button will bring up the MAIN MENU.
Pressing the MENU button again, or the GAUGE DISPLAY soft
button, will return to the GAUGE DISPLAY mode.
Fig 31. Main Menu
39
Soft Buttons
Enter Button
Operation Manual