Boom Control - Xtreme xr1255 Operation And Safety Manual

Boom Control

The boom control handle has variable motions from the
center position that control boom and tilt functions. The
boom control handle is used to raise, lower, extend, retract the
boom, tilt the carriage (or attachment), and control auxiliary
functions (when equipped with a carriage or attachment with
additional functions).
NOTE: The boom control handle is a variable speed control.
Function speed is proportional to handle movement. The
more the handle is moved in the appropriate direction, the
faster the corresponding function will occur.
NOTE: Increasing engine speed can increase boom lift and
extend speed.
NOTE: Two (2) boom functions can be performed at the
same time by moving the handle into the corner between (2)
functions
Figure 43. Boom Control Handle
Boom Control Handle Functions
Function
Aux Select Button Control auxiliary functions
Enable Trigger Trigger must be enabled for other
functions of the control handle to
operate
Tilt Switch Control carriage tilt (up/down)
Operation Manual
Purpose
A
B
C
D
E
F
G
H
Figure 44. Boom Control Handle Functions
Figure 45. Boom Control Handle Functions
42
Operator Cab