King gates LINEAR 500230 Installation And Use Instructions And Warnings page 19

CE Declaration of Conformity and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 12004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note – The content of this declaration corresponds to that specified in the official document deposited at the King gates srl headquarters and, in par-
ticular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for editorial purposes. A copy of
the original declaration can be requested from King gates (PN) Italy.
Declaration number: K109/LINEAR
Manufacturer's Name: KING GATES S.R.L.
Address: Via A. Malignani 42, 33077 Sacile (PN) Italy
Type of product: Telectromechanical gearmotor for swing gates
Model / Type: LINEAR500230, LINEAR50024, LINEAR400230, LINEAR400244
Accessories: -
The undersigned Giorgio Zanutto, as Managing Director, hereby declares under his own responsibility that the products identified above comply with
the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the
Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with following harmonised standards: EN
61000-6-2:2005, EN 61000-6-4:2007
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast), in ac-
cordance with the following harmonised standards:
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and that the
following essential requirements have been satisfied: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to submit pertinent information on the partly completed machinery to the national authorities, in response to a motivated re-
quest, without affecting its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language used in this declaration, the im-
porter must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions
of Directive 2006/42/EC, if applicable.
The product also complies with the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+ A14:2010 +
A15:2011; EN 60335-2-103:2003 +A1:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Sacile, 09 05 2014
Revision: 0 Language: EN
Giorgio Zanutto
(Managing Director)
5