Product Maintenance; Disposal Of The Product; Accessories On Request - King gates INTRO Installation And Use Instructions And Warnings

• disconnect the power supply to the control unit;
• release the gearmotor from the gate leaf as shown in paragraph
"Manual release device (Key and Lever-Operated Release)" in Chap-
ter "Instructions and Warnings for Users of the INTRO Gearmotor";
• open the gate manually all the way;
• make sure the gate opens and closes smoothly without any points
of friction;
• make sure that the gate, when stopped in any position and re-
leased, does not display a tendency to start moving again;
• make sure that the safety systems and mechanical stops are in
good working order;
• make sure that the screw connections are properly tightened;
• clean the inside of the box and make sure that the drain operates
properly;
• when all the checks have been completed, re-connect the gear-
motor and power the control unit;
• INTRO is not equipped with any torque adjustment device, there-
fore this operation is performed by the control unit;
• measure the impact force as provided by the EN12453 and
EN12445 standards.
7. Product mainte-
nance
INTRO does not require any special maintenance; however, routine
checks conducted every six months at least will ensure the long life
of the gearmotor as well as the correct and safe operation of the
system.
Maintenance consists simply in repeating the testing proce-
dure.
8. Disposal of the
product
This product is an integral part of the automation system, and
should therefore be disposed of together with it.
As for the installation operations, even at the end of this product's
life span, the dismantling operations must be carried out by qualified
experts.
This product is made up of various types of materials: some can be
recycled while others need to be disposed of. Find out about the
recycling or disposal systems envisaged by your local regulations for
this product category.
Attention! – Parts of the product could contain pollutants or hazard-
ous substances which, if released into the environment, could cause
harmful effects to the environment itself as well as to human health.
As indicated by the symbol opposite, throwing away
this product as domestic waste is strictly forbidden.
So dispose of it as differentiated waste, in accordance
with your local regulations, or return the product to the
retailer when you purchase a new equivalent product.
Important! – the local applicable regulations may envisage heavy
sanctions in the event of illegal disposal of this product.
9. Accessories on re-
quest
LOCK HO Vertical electric lock 12 Vac
LOCK VE Horizontal electric lock 12 Vac
INT 360 360° opening device
INTROLOCK Key-operated release mechanism
5