About The Supported Laserjet Printers - Philips ST80i Instructions For Use Manual

About the Supported LaserJet Printers

Figure C-3 Connecting the thermal printer to the ST80i PC
About the Supported LaserJet Printers
ST80i also supports the use of the HP 4250 LaserJet, HP P2055, and HP P4014 PCL5 printers
using drivers for the Windows 7 operating system.
It is capable of printing reports, without a grid, at 35 ppm. It prints with a grid at
approximately 2 ppm.
N O T E The LaserJet printer must be a local printer, connected directly to the ST80i test system if it will be
used during testing. It cannot be a network printer, as connection to the network is disabled during a
test.
For details about the printers, refer to the HP website ( ) or to the printer
www.hp.com
documentation.
ST80i Stress Test System Instructions for Use C-7