Starting A Patient Session; Select The Patient - Philips ST80i Instructions For Use Manual

Starting a Patient Session

When you select a patient from the Worklist for the stress test, you are immediately brought to
the Pre Exercise screen. Based on your user account settings at log-in, a preconfigured profile
is loaded for the stress test protocol.

Select the Patient

To select a patient from the Worklist
Click
1
Place a checkmark in the patient name line and click
2
name.
The Pre Exercise screen is displayed. The patient's name and date of birth appear on the
Title Bar along with the patient ID. The selected protocol is shown on the Procedure Bar.
Figure 3-4
By default, the application displays the real-time ECG waveforms in the format specified in
the selected user profile.
To change the real-time ECG display, see "Using the Toolbar Icons" on page 2-15.
When Bruce is selected as the protocol, the
If you select Cycle as the protocol for the patient, the
on the Main screen.
Patient
Pre Exercise Screen
or double-click the patient's
OK,
button appears in the Side Panel.
Start Treadmill
Load Ergometer
ST80i Stress Test System Instructions for Use

Starting a Patient Session

button appears instead.
3-15