About This Guide; About The Data Export Test Tool - Philips MPX2 Instructions For Use Manual

These Instructions for Use are for technicians and biomedical engineers using the Data Export Test
Tool (DETT) with the Philips IntelliVue MP2 / X2 / MP5 / MP20 / MP30 / MP40 / MP50 / MP60
/ MP70 / MP80 / MP90 /MX800 (M8102A / M3002A / M8105A / M8001A / M8002A / M8003A
/ M8004A / M8005A / M8007A / M8008A / M8010A / 865240) patient monitors, hereafter referred
to as the patient monitor. They describe the functionality of the Data Export Test Tool.
IFU (Instructions for Use) is used as an abbreviation and will refer to this document.
WARNING
This Data Export Test Tool is not intended for clinical use.
In this guide
• A warning alerts you to a potential serious outcome, adverse event or safety hazard. Failure to
observe a warning may result in death or serious injury to the user or patient.
• A caution alerts you where special care is necessary for the safe and effective use of the product.
Failure to observe a caution may result in minor or moderate personal injury or damage to the
product or other property, and possibly in a remote risk of more serious injury.

About the Data Export Test Tool

DETT is used to test the communication interface protocol, which transfers data from the Philips
IntelliVue Patient Monitor via the Local Area Network (LAN) Interface or Serial Interface (MIB/
RS232) to an external Computer.
The IntelliVue Data Export Interface cannot be accessed via the Local Area Network when the
IntelliVue monitor is connected to the Philips LAN, e.g. to an Information Center (central station).
Communication via the MIB/RS232 Interface is always possible.
Please refer to the latest version of the Data Export Interface Programming Guide for further details
about the IntelliVue Data export interface specifications.

About this Guide

1
1
5