Loading The Thermal Printer Paper - Philips ST80i Instructions For Use Manual

Table C-2 Input and Output descriptions
Feature
AC Power
Power On Indicator
Hard Copy Printout

Loading the Thermal Printer Paper

To load the paper
Remove the outer packaging from the paper pack.
1
Facing the front of the unit, use the release latch on the left side and slide the paper tray
2
cover to the left.
Description
The ST80i thermal printer operates on 120/240 VAC at
50/60 Hz. Power is supplied to the thermal writer as soon as
the AC power cord is connected to an AC power outlet
This indicator will illuminate in green when AC power is
applied.
The ST80i thermal printer uses 8 1/2 in x 11 in
(21 cm x 27.9 cm) sheets of z-folded, thermal sensitive
paper with cue marks. Printing speeds are 10, 25, and
50 mm per second. Dot density is eight dots per millimeter
or 203.2 dpi.
ST80i Stress Test System Instructions for Use
ST80i Thermal Printer
.
C-5