St80I System Requirements - Philips ST80i Instructions For Use Manual

Specifications and Requirements
Table E-1
Component
Processor
Memory
Hard disk
Display
Network
CD-ROM drive
Operating system
External Connectivity
E-2 ST80i Stress Test System Instructions for Use
Minimum ST80i system requirements
Minimum Hardware/Software Specifications
Intel® Core™ i5-2400S (2.50 GHz, 6 MB cache, 4 cores)
4GB 1333 MHz DDR3 SDRAM
No less than 160 GB SATA; 7200 RPM
The lowest resolution for each layout:
For 4:3, the lowest resolution is 1024 x768

For 16:9, the lowest resolution is 1280 x720

NOTE The display used with ST80i must meet UL/IEC 60950-1
Safety Standards for Information Technology Equipment.
The PC's LAN interface should support IEEE 802.3

compliant 10M/100M/1000M Base-T(X) Ethernet
connections
LAN connection for laser printer is required

Optional LAN card for networking capabilities

CD-RW/DVD combo drive
Microsoft Windows 7 Professional
The system must have the following external connections:
RS232-USB bridge

100-240V 50/60Hz AC Power input

Display output

LAN

Minimum of five (5) USB ports.

ST80i may use an external USB hub to extend the USB
ports for easier user access, if required.
Speaker output

Printer port.
