Specifications
ST80i System Specifications
The system does not contain user-serviceable parts. Any modification of this device may alter
CAUTION
defibrillator protection. Only qualified service personnel are authorized to modify any part of this
device.
Table E-2
Function
Instrument type
Isolation transformer power
Input Channels
Standard leads
Exercise equipment
interface
Automatic blood pressure
measurement option
Network option
Remote Review Workstation
option
Display format
ECG input
Input impedance
Input dynamic range
ST80i system specifications
Specifications
Exercise stress test system
Rated Input/Output Voltage:
Rated Input/Output Voltage:
Simultaneous acquisition of all 12 leads
I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
Digital serial interface to treadmill or ergometer
Supports optional SpO2 and motion tolerant NIBP
modules.
Optional Network interface for data transfer and printing
across your local network
Optional Remote Review Workstation for review, printing,
and editing of patient text data acquired from the ST80i
system.
Sweep speed. Two supported speeds: 25 mm/s and 50 mm/s
Size
Resolution.
Simultaneous input from all 12 leads
Meets the requirements of ANSI/AAMI EC-11
Defibrillator protected when used with specified
patient cable
Meets the requirements of ANSI/AAMI EC-11
120 VAC @ 50/60 Hz
240 VAC @ 50/60 Hz
Range from 19" to 24"
The lowest resolution for each layout:
For 4:3, the lowest resolution is 1024x768
For 16:9, the lowest resolution is 1280x720
ST80i Stress Test System Instructions for Use
Specifications
E-3