Philips ST80i Instructions For Use Manual page 226

Table E-8 Guidance and Manufacturer's Declaration: Electromagnetic Immunity
Emissions IEC 60601
Test Test Level
Conducted 3Vrms,
Immunity,
0.15 MHz to
Induced RF
80 MHz, @
IEC 10 Hz AM
61000-4-6
Radiated RF General Test:
3V/m, 80 MHz
IEC
to 2.5 GHz @
61000-4-3
10 Hz AM
Digital Radio
Test: 3V/m
80% AM @
1kHz ,
800 MHz to
960 MHz ,
1.4 GHz to
2.5 GHz
Compliance Electromagnetic Environment Guidance
Level
3Vrms, Portable and mobile RF communications equipment
should be used no closer to any part of the ST80i
0.15 MHz to
Stress Test System and optional Thermal Printer,
80 MHz, @
including cables, than the recommended separation
10 Hz AM
distance calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance:
d
General Test:
d
3V/m, 80 MHz
to 2.5 GHz @
10 Hz AM
Digital Radio
Test: 3V/m
d
80% AM @
1kHz , 800 MHz
to 960 MHz ,
Where
1.4 GHz to
transmitter in watts (
2.5 GHz
manufacturer and
distance in meters (
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey
be less than the compliance level in each frequency
range
Interference may occur in the vicinity of equipment
marked with the following symbol:
 
3 5 .
=
P
 
 
3 Vrms
 
3 5 .
=
P
   
80 MHz to 800 MHz
3 V / m
 
7
=
P
   
800 MHz to 2.5 GHz
3 V / m
is the maximum output power rating of the
P
) according to the transmitter
W
is the recommended separation
d
).
m
b
.
a
, should