Ending the Patient Session
After saving the Final Stress Report, you are ready to close out the patient session.
The patient can now be disconnected from the PIM:
Detach patient from PIM.
Detach electrodes.
For details about working with the final report, including viewing, editing, printing, and
saving reports, see "Working with Reports" on page 4-1.
Starting a New Patient Session
You do not have to exit the application to start a new session, unless you want to use a
different user profile. Otherwise, you exit the application only when you are shutting down the
system.
Once the data from the previous patient session has been saved, you can begin a new
patient session. All user profile settings will return to the same as the previous test unless
the application is exited and a different user logs in. Some of the settings changed using the
Gear (Quick Settings)
N O T E
All patient information and stress study data of the previous patient is cleared automatically when a
new patient session starts.
To start a new patient session
Select Main.
1
Select Worklist.
2
Select the patient's name.
3
Exiting the Application
You exit the application when need to use a different profile, when a new user is logging onto
the system, or when you are shutting down the system.
To exit the ST80i application
Click the "X" in the upper right corner of the Main screen.
icon also remain in effect.
Ending the Patient Session
ST80i Stress Test System Instructions for Use
3-47