Resting Ecg Report - Philips ST80i Instructions For Use Manual

Working with Reports
To select an Event, click anywhere in the Event snapshot to highlight it.
2
IMPORTANT!
Rhythm change notifications are provided when specific rhythm changes are detected; however, it is
the responsibility of the trained healthcare professional to determine the type of rhythm change and
appropriate action.
Additionally, the healthcare professional should not assume that all rhythm changes will be detected
and they are responsible for taking action when rhythm changes are observed on the displayed
waveforms and system fails to provide a notification. It is expected that only properly trained health
care professionals working directly under the supervision of a qualified physician will be operating the
ST80i Stress Test System during testing.

Resting ECG Report

Resting ECG measurement and interpretation are included as part of a 12-Lead ECG Report.
The 12-Lead ECG is printed according to the user profile settings. A Resting ECG is printed at
the beginning of each exercise stress test and is then printed in the Final Stress Report.
The Resting ECG tab shows a report of the resting ECG. At the top part of the report, patient
data as well as ECG data appears with interpretation. Before the formal stress testing starts, or
after the stress testing is complete, you can print a 12-Lead Resting ECG report.
The waveform area captures the ECG during the resting or supine stage during the Pre-
Exercise phase. The report is labeled "Supine" or "Mason-Likar."
The report includes:
Patient Demographic Data

Study Information

Interpretation of 12-Lead ECG Report

12x1, 6x2, 3x4, 3x4 3R display

Specific patient data is required for each interpretation. If entered data are found to be incorrect, the
CAUTION
ECG file may be edited and a new display/report can be printed.
You can configure mandatory patient information fields in system configuration. When these
mandatory fields are missing, you will be warned with a pop-up message box. If these fields
are changed, a warning message pops up and the resting ECG will be re-interpreted.
On this screen, you can scroll through the images on the screen using the right and left arrows.
You can also print a Resting ECG using the
4-22 ST80i Stress Test System Instructions for Use
button on the Resting ECG screen.
Print