2
Function
LED
Significance
(green)
Input status (digital input modules CTMM-S1-D-... only)
P
Short circuit/overload
(red)
2) Logic: LED illuminated when the connected PNP N/O contact is closed.
Tab. 2.5
2.1.3
Control components
The product has no mechanical control components. Parameters and setpoint values are set solely via the
WebConfig user interface or using the higher-order controller (PLC).
The WebConfig interface can be opened with a web browser if there is an existing Ethernet connection to the
controller of the Motion Terminal (è 2.2 WebConfig user interface).
2.1.4
Connection components
2.1.4.1
Electrical
1 Functional earth connection
(must be connected in addition to the functional
earth on the CPX side)
Fig. 2.5
1 Ethernet interface
Fig. 2.6
Ethernet interface
The Ethernet interface is located on the controller behind a transparent cover.
The Ethernet interface is used exclusively for accessing the WebConfig user interface for the controller.
12
1
PL
ST
1
SP
Festo – VTEM-Func+Par-EN – 2018-05a – English
M
PS