13
SERVICE WORK ON THE CHASSIS
13.17
Checking the chain, rear sprocket, engine sprocket, and chain guide
Main work
–
Loosen screw
–
Set the chain tension by turning the hub housing.
Hook wrench (61329085000)
Handle for ring wrench (60012060000)
Info
Turn clockwise to increase the chain tension; turn counterclockwise to reduce
the chain tension.
S01107-10
–
Check the chain tension. (
The chain tension matches the specified value.
Info
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
–
Tighten screw
Guideline
Screw, eccentric
–
Remove the rear of the motorcycle from the lifting gear. (
Preparatory work
–
Lift the motorcycle with the rear lifting gear. (
.
p. 114)
.
M16
70 Nm
(51.6 lbf ft)
p. 103)
p. 103)
116