Firmware Update - Lectrosonics DBa Instruction Manual

DBa

Firmware Update

Updating the firmware is a simple matter of download-
ing a utility program and file from the website and
running the program on a Windows operating system
with the transmitter connected to a computer via the
USB port.
Go to www.lectrosonics.com/US. In the top menu, hover
the mouse over Support, and click on Wireless Support.
On the right-hand-side Wireless Support Menu, choose
Wireless Downloads. Choose your product (DSW Se-
ries,) then choose DB Firmware.
Step 1:
Begin by downloading the USB Firmware Updater
Program.
18
Step 2:
Next, test the Updater by opening the icon:
driver opens automatically, proceed to Step 3.
WARNING: If you receive the following error, the FTDI
USB Device Driver is not installed on your system.
Follow the TROUBLESHOOTING steps to fix the error.
TROUBLESHOOTING:
Then click here to download.
NOTE: This website, http://www.ftdichip.com/
Drivers/D2XX.htm, is not associated with
Lectrosonics.com. It is a third party site used
only for D2XX drivers currently available for
Lectrosonics' devices' upgrades.
If the
If you receive
the FTDI
D2XX error
shown above,
download
and install
the driver by
clicking on
this link.
LECTROSONICS, INC.