Related Manuals for Lectrosonics DPR
Summary of Contents for Lectrosonics DPR
- Page 1 INSTRUCTION MANUAL Digital Plug-On Transmitter DPR, DPR/E01 Fill in for your records: Serial Number: Rio Rancho, NM, USA Purchase Date: www.lectrosonics.com...
- Page 2 DPR, DPR/E01 LECTROSONICS, INC.
-
Page 3: Table Of Contents
HEADER SUPPORT ..........9 Accessories ................. 19 Compatibility withmicroSDHC memory cards ....9 21750 Barrel Adapter ............19 DPR Menu ................10 MCA-M30 Barrel Adapter ........... 19 Setup Screen Details ............12 PHTRAN3 ................19 Main Window Indicators ............. 12 MCA5X ................ -
Page 4: General Technical Description
The housing is machined from a solid aluminum block to provide a The DPR has a built in recording function for use in lightweight and rugged package. A special non-corro- situations where RF may not be possible or to work as sive finish resists salt water exposure and perspiration a stand alone recorder. -
Page 5: Features
Digital Plug-On Transmitter Features MENU/SEL Button The MENU/SEL button is used to display the transmit- ter menu items. Press once to open the menu, then Modulation PWR LED use the UP and DOWN arrows to scroll menu items. LEDs Input KEY LED UP Arrow Press MENU/SEL again to choose an option from the... -
Page 6: Battery Installation
DPR, DPR/E01 Battery Installation Attaching/Removing a Microphone The battery compartment door is made of machined aluminum and is hinged to the housing to prevent it be- ing damaged or lost. The spring loaded coupler under the XLR jack main- tains a secure fit to the microphone jack with continu- The transmitter is powered by two AA batteries. -
Page 7: Operating Instructions
Digital Plug-On Transmitter Operating Instructions Transmitter Operating Instructions Modulation UP Arrow PWR LED KEY LED LEDs • Install battery(s) • Turn power on in the Standby mode (see previous section) • Connect microphone and place it in the position where it will be used. •... -
Page 8: Recorder Operating Instructions
Use the UP and DOWN arrow buttons to adjust the SD card. When the DPR “formats” a card, it per- Gain the gain until the -20 forms a function similar to the Windows “Quick Format”... -
Page 9: Important
The formatting of the SD card sets up contiguous sectors for maximum efficiency in the recording process. The file format utilizes the BEXT (Broadcast Please note that the DPR is designed for use with Extension) wave format which has sufficient data microSDHC memory cards. There are several types... -
Page 10: Dpr Menu
DPR, DPR/E01 DPR Menu Gain Use arrow keys to Input select input gain BACK Rolloff Use arrow keys to select 70 Hz Use arrow keys to Phase Normal select audio output Invert polarity Phantom Use arrow keys to select Use arrow keys... - Page 11 Digital Plug-On Transmitter TC Jam Plug in time code TCode source and sync BACK JAM NOW Use arrow keys to select Fr.Rate Press to set MENU frame rate of 30, 29.97, 25, function 24, 23.976, 30DF, or 29.97DF LOADING Use Clk TIMECODE Plug in clock FROM...
-
Page 12: Setup Screen Details
Input... RF energy present. The software then automatically selects the best channel for operation. Gain Lectrosonics receivers equipped with an IR Sync func- Rolloff tion allow the receiver to set frequency on the transmit- Phase ter via an infrared link between the two units. -
Page 13: Selecting The Low Frequency Roll-Off
DC connected to ground, then you will draw maxi- comb filtering. The polarity can also be inverted at the mum current from the power supply. The DPR is fully receiver outputs. protected against such shorts but the batteries will be drained at twice the normal rate. -
Page 14: Xmit Menu
DPR, DPR/E01 Xmit Menu Choosing Files for Replay Select recorded Selecting Frequency SDCard... Files files on 0004B microSDHC Record The setup screen for frequency selection offers two 0003B memory card. 0002C ways to browse the available frequencies. Files 0001C 0002B... -
Page 15: Microsdhc Memory Card Info
The groups are created using Lectrosonics DSQD receiver or via Wireless Designer, then the • 24 groups are shared with the DPR via IR sync or microS- NOTE: While it is possible to change the frame DHC Memory Card transmission. -
Page 16: Key Menu
Set the matching KEY TYPE in the DPR and transfer WipeKey the key from the receiver (SYNC KEY) to the DPR via SendKey Share the IR ports. A confirmation message will display on the receiver display if the transfer is successful. -
Page 17: Setting Battery Timer
Changes to the settings can be locked to prevent inad- vertent changes being made. About Setup... Freq. Locked? BatTime Displays the DPR model number, firmware versions 494.500 and serial number. Clock Locked? V0.20 A small padlock symbol will appear on adjustment (f00.20) -
Page 18: Lectrorm
The user interface involves selecting the audio se- Please be aware this app is not a quence related to the desired change. Each version Lectrosonics product. It is privately owned has an interface for selecting the desired setting and and operated by New Endian LLC, the desired option for that setting. -
Page 19: Accessories
This is an optional adapter for connecting a lavaliere microphone to the DPR or HM transmitters. TA5M to MCA-M30 Barrel Adapter XLR3-M connectors. Passes transmitter phantom power to bias the electret lavaliere microphone. Includes zener protection to limit bias voltage to protect the microphone if transmitter phantom power is set too high. -
Page 20: Specifications And Features
FCC RF exposure guidelines. AA lithium; 48V Phantom Power: 3h 30m** Contact Lectrosonics if you have any questions or need more information about RF exposure using this product.. *Tested with a dynamic microphone **Tested with a Sanken CS1 for a... -
Page 21: Firmware Update
- on very rare occasions, you might browser. need to update the bootloader. 2) Copy the dpr vX_xx.ldr file to the memory card, WARNING: Updating the bootloader can then safely eject the card from the computer. corrupt your unit if interrupted. Don’t update... -
Page 22: Recovery Process
The file must be recovered or the card will not be usable in the DPR. First it will read: Interrupted Recording... -
Page 23: Service And Repair
LECTROSONICS’ Service Department is equipped and staffed to quickly repair your equipment. In warranty repairs are made at no charge in accordance with the terms of the warranty. Out-of-warranty repairs are charged at a modest flat rate plus parts and shipping. - Page 24 This warranty does not apply to used or demonstrator equipment. Should any defect develop, Lectrosonics, Inc. will, at our option, repair or replace any defective parts without charge for either parts or labor. If Lectrosonics, Inc. cannot correct the defect in your equipment, it will be replaced at no charge with a similar new item.
Need help?
Do you have a question about the DPR and is the answer not in the manual?
Questions and answers