Repackaging Instructions; Packaging; Shipping To The Service Center - Tektronix WVR5200 Service Manual

Repackaging Instructions

Packaging

Shipping to the Service Center

WVR5200 Waveform Rasterizer Service Manual
This section contains the information needed to repackage the instrument for
shipment or storage.
When repacking the instrument for shipment, use the original packaging. If
the packaging is unavailable or unfit for use, contact your local Tektronix
representative to obtain new packaging. Refer to Contacting Tektronix, following
the copyright statement, for the mailing address, the email address, and phone
number.
Seal the shipping carton with an industrial stapler or strapping tape.
Contact the Service Center to get an RMA (Return Material Authorization)
number, and any return or shipping information you may need.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
The RMA number.
The owner's address.
Name and phone number of a contact person.
Type and serial number of the instrument.
Reason for returning.
A complete description of the service required.
Mark the address of the Tektronix Service Center and the return address on the
shipping carton in two prominent locations.
Repackaging Instructions
27