Repackaging Instructions; Packaging; Shipping To The Service Center - Tektronix CSA8000 Service Manual

Repackaging Instructions

Packaging

Shipping to the Service Center

CSA8000 & TDS8000 Instruments and Sampling Modules
This section contains the information needed to repackage the portable main-
frame for shipment or storage.
When repacking the instrument or sampling modules for shipment, use the
original packaging. If the packaging is unavailable or unfit for use, contact your
local Tektronix representative to obtain new packaging. Refer to Contacting
Tektronix on page xvii for Tektronix's address, email address and phone number.
Seal the shipping carton with an industrial stapler or strapping tape.
Contact the Service Center to get an RMA (return material authorization)
number, and any return or shipping information you may need.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
H The RMA number.
H The owner's address.
H Name and phone number of a contact person.
H Type and serial number of the instrument.
H Reason for returning.
H A complete description of the service required.
Mark the address of the Tektronix Service Center and the return address on the
shipping carton in two prominent locations.
6–81